Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Vision A.I bad at face rush decks !
Options
Previous Topic Next Topic
4msailor
#1 Posted : Monday, April 17, 2017 12:18:52 PM(UTC)
Rank: Newbie

Groups: Registered
Posts: 3

Thanks: 1 times
I've been primarily using face hunter with this bot and usually end up with 9-15 wins in the 120 min period but today for the first time ever , the bot won just once in the allotted 2 hours . Personally i don't think its the A.I's fault per se but the lack of options to select how a deck is supposed to be played (rush . zoo etc...) like in the previous versions .

Please rekindle its SMOrc-ing prowess .

Thanks for your time and also for saving our time with this wonderful bot .
Back to top
WWW
 |  Edit by user
fabio15
#2 Posted : Monday, April 17, 2017 3:28:29 PM(UTC)
Rank: Newbie

Groups: Registered
Posts: 2

Thanks: 1 times
I have the same problem, i've been used to play with zoolock with the old A.I, round 50% win. Using Vision A.I, 29%, the bot is slow, too many calculations, if your board is full, your turn ends and u can't use all your minions cause its slow.
Back to top
WWW
JoyAdmin
#3 Posted : Monday, April 17, 2017 10:32:37 PM(UTC)
Rank: Administration

Groups: Administrators
Posts: 4,881

Thanks: 808 times
Was thanked: 4545 time(s) in 1642 post(s)
If you're using aggro deck, read [deck_config.ini] under [CustomConfig] dir and set your deck to use aggro, that's all.
Back to top
WWW
2 users thanked JoyAdmin for this useful post.
4msailor on 4/18/2017(UTC), fabio15 on 4/18/2017(UTC)
whatnosori
#4 Posted : Monday, April 17, 2017 10:49:25 PM(UTC)
whatnosori


Rank: Advanced Member

Groups: Registered
Posts: 76

Thanks: 18 times
Was thanked: 10 time(s) in 9 post(s)
JoyAdmin;48008 wrote:
If you're using aggro deck, read [deck_config.ini] under [CustomConfig] dir and set your deck to use aggro, that's all.


Hey Joy,

Is there a card database somewhere that shows what to use for mulligan/combo settings etc?

E.g. Patches = CFM_637
Back to top
WWW
JoyAdmin
#5 Posted : Monday, April 17, 2017 11:13:01 PM(UTC)
Rank: Administration

Groups: Administrators
Posts: 4,881

Thanks: 808 times
Was thanked: 4545 time(s) in 1642 post(s)
In debugger, check [Show Card ID].

or in Card Viewer from task editor, search the card then stay the mouse for a while to see the hint text.
Back to top
WWW
whatnosori
#6 Posted : Monday, April 17, 2017 11:24:41 PM(UTC)
whatnosori


Rank: Advanced Member

Groups: Registered
Posts: 76

Thanks: 18 times
Was thanked: 10 time(s) in 9 post(s)
JoyAdmin;48011 wrote:
In debugger, check [Show Card ID].

or in Card Viewer from task editor, search the card then stay the mouse for a while to see the hint text.

Perfect, thank you!
Back to top
WWW
4msailor
#7 Posted : Tuesday, April 18, 2017 7:29:31 AM(UTC)
Rank: Newbie

Groups: Registered
Posts: 3

Thanks: 1 times
Appreciate the help Joy , now the aggro part is fixed but new ones have crept up . I have reported the bot misplays with the screenshots but since I've started this post , I'll mention it if its all the same .

1.Bot almost never plays the 1 drops from the newest expansion (even if i end up with spare mana) like Raptor Hatchling , Emerald Reaver unless and until its the only cards left to play . No problems with the old 1 drops , fiery bat turn 1 gets played but not the new ones .
2.After Cloaked Huntress gets summoned , the 0 mana freezing trap is not played (empty board) .
3.Crackling Razormaw is a dead card , this bot cant seem to trigger its adapt a beast battlecry , it jumps back and forth from hand to board until the timer ends .

Thanks again and hope u guys fix these issues too , cheers :)
Back to top
WWW
xleckn
#15 Posted : Tuesday, April 18, 2017 8:00:55 AM(UTC)
Rank: Member

Groups: Registered
Posts: 16

Thanks: 2 times
Where can i find [deck_config.ini] under [CustomConfig] ? thansk
Back to top
WWW
divaeva
#8 Posted : Tuesday, April 18, 2017 9:14:53 AM(UTC)
Rank: Newbie

Groups: Registered
Posts: 6

Thanks: 13 times
Was thanked: 2 time(s) in 2 post(s)
4msailor;48047 wrote:

1.Bot almost never plays the 1 drops from the newest expansion (even if i end up with spare mana) like Raptor Hatchling , Emerald Reaver unless and until its the only cards left to play . No problems with the old 1 drops , fier2.After Cloaked Huntresy bat turn 1 gets played but not the new ones .
3.Crackling Razormaw is a dead card , this bot cant seem to trigger its adapt a beast battlecry , it jumps back and forth from hand to board until the timer ends .

there was a post from JoyAdmin about there is another version release in next few days to support all Ungoro cards. Current AI didn't support those cards.


xleckn;48056 wrote:
Where can i find [deck_config.ini] under [CustomConfig] ? thansk


CustomConfig is a folder name where you can find it at C:\Hearthranger\HearthRanger AI\CustomConfig (my example)
deck_config.ini is a file name where you find it in C:\Hearthranger\HearthRanger AI\CustomConfig\ (can view it with notepad to edit it)
Back to top
WWW
1 user thanked divaeva for this useful post.
JoyAdmin on 4/18/2017(UTC)
JoyAdmin
#16 Posted : Tuesday, April 18, 2017 9:30:20 AM(UTC)
Rank: Administration

Groups: Administrators
Posts: 4,881

Thanks: 808 times
Was thanked: 4545 time(s) in 1642 post(s)
If your bot version is higher than v.9.0.0.0, then it can play all Un'Goro cards.
Back to top
WWW
DarkFennec
#11 Posted : Tuesday, April 18, 2017 3:09:33 PM(UTC)

Rank: Advanced Member

Groups: Registered
Posts: 90

Thanks: 15 times
Was thanked: 18 time(s) in 17 post(s)
I've found it but still not understand what we need to put in the config.ini... and if we write something what we have to do when saving?

Please create a full guide asap..

divaeva;48062 wrote:
there was a post from JoyAdmin about there is another version release in next few days to support all Ungoro cards. Current AI didn't support those cards.




CustomConfig is a folder name where you can find it at C:\Hearthranger\HearthRanger AI\CustomConfig (my example)
deck_config.ini is a file name where you find it in C:\Hearthranger\HearthRanger AI\CustomConfig\ (can view it with notepad to edit it)
Back to top
WWW
4msailor
#9 Posted : Tuesday, April 18, 2017 3:18:38 PM(UTC)
Rank: Newbie

Groups: Registered
Posts: 3

Thanks: 1 times
divaeva;48062 wrote:
there was a post from JoyAdmin about there is another version release in next few days to support all Ungoro cards. Current AI didn't support those cards.


Like Joy stated above , it does support all Un'Goro cards and I'm using the latest version (9.0.0.2) but there's some minor bugs here and there , that's all .
Back to top
WWW
divaeva
#12 Posted : Tuesday, April 18, 2017 4:01:37 PM(UTC)
Rank: Newbie

Groups: Registered
Posts: 6

Thanks: 13 times
Was thanked: 2 time(s) in 2 post(s)
DarkFennec;48086 wrote:
I've found it but still not understand what we need to put in the config.ini... and if we write something what we have to do when saving?

Please create a full guide asap..


if in hearthstone, your pirate warrior deck named: Aggro Warrior
then in deck_config.ini, you should change to:

[CONFIGS]
Aggro Warrior = warrior_pirate
Back to top
WWW
DarkFennec
#13 Posted : Tuesday, April 18, 2017 4:16:07 PM(UTC)

Rank: Advanced Member

Groups: Registered
Posts: 90

Thanks: 15 times
Was thanked: 18 time(s) in 17 post(s)
ok, the deck name is easy, but after? configs.txt was huge than this file, we can only change and add the deck name? :O



divaeva;48094 wrote:
if in hearthstone, your pirate warrior deck named: Aggro Warrior
then in deck_config.ini, you should change to:

[CONFIGS]
Aggro Warrior = warrior_pirate
Back to top
WWW
JoyAdmin
#14 Posted : Tuesday, April 18, 2017 10:19:15 PM(UTC)
Rank: Administration

Groups: Administrators
Posts: 4,881

Thanks: 808 times
Was thanked: 4545 time(s) in 1642 post(s)
DarkFennec;48095 wrote:
ok, the deck name is easy, but after? configs.txt was huge than this file, we can only change and add the deck name? :O


[warrior_pirate] is a pre-configed dir, set the deck name is all you need to do, then bot will play totally different compare to default settings.
Back to top
WWW
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2011, Yet Another Forum.NET
This page was generated in 0.139 seconds.